Why Does the Toilet Overflow When Someone Is in the Shower?
The sewer system in your house may seem simple, but it was actually designed very carefully by a plumbing engineer before it was built. When it experiences problems, a wide range of impacts can be noticed. One common problem in Royal Oak, MI, is a toilet overflow when the shower is running. Here’s what causes it, what some signs are and how to deal with sewage cleaning.
What Are the Most Common Causes?
Since almost all residential sewer systems use gravity as an engine to get the sewage flowing, it can be susceptible to quite a few issues. However, the most frequent problems found are
- A clogged pipe
- A break in the sewer line
- Tree roots between the home and the public sewer
What Are the Symptoms?
If you step out of the shower and into a puddle that came from the toilet, that’s a sure sign of trouble and it may require sewage cleaning. Hopefully, you can catch it before it gets that far. If it has, you may need an affordable restoration company in Royal Oak, MI, to inspect the damage and quickly remove excess water.
The most common sign to watch for is bubbles in the toilet. If there is a clog in the line, water won’t drain away fast enough. This fills the sewer pipes with water, forcing the air to go somewhere. Since the toilet is usually so close to the shower, it is often the first sign of trouble. Ignore it at your peril!
What Should You Do After an Overflow?
You certainly should avoid using that shower again until you get the problem fixed! However, your first move is to immediately soak up all the standing water.
If the water doesn’t have obvious fecal matter in it, it’s still considered septic and should be examined by your restoration company. If it was a tiny amount and didn’t soak through the floor or walls, you can usually clean it yourself with a little bleach and water. If in doubt, always consult with an expert at sewage cleaning.